![]() Make sure that the limbs are aligned properly and that all the bolts are secured. To do this, make sure to inspect the crossbow and check that the string is tight and secure. Once the string is secure and at the right tension, the next step is to finish up the restringing process. It is important to not over-tension the string, as this can cause the string to break. This will increase the tension on the string until it is at the desired level for your crossbow. To do this, use the Barnett Crossbow’s supplied wrench to turn the limb bolts clockwise. Once the string is attached to the crossbow, the next step is to tension the string. Make sure to keep the string tight and secure as you do this. Insert the two ends of the string into the loops on the cam and pull the string down to secure it in place. Now that you have the new string cut and measured, the next step is to attach it to the crossbow. Step 3: Attaching the String to the Crossbow If the string is too long, it can cause the crossbow to misfire or jam, resulting in injury. It is important to make sure that the new string is the exact same length as the original. Then, carefully cut the new string to match the old string’s length. Measure the old string to determine the length that is needed for the new string. Next, you’ll need to measure and cut the new string for your Barnett Crossbow. Step 2: Measuring and Cutting the New String Make sure to save this old string so that you can use it as a reference when measuring the new string. This will cause the string to come loose and can be removed. Insert the allen wrench into the two bolts located at the top of the crossbow and loosen the bolts. To do this, you’ll need an allen wrench. Step 1: Removing the Stringīefore beginning the process of restringing a Barnett Crossbow, the first step is to remove the string. After reading this section, you should be able to do the job without any issues what so ever. Here’s a detailed guide on how to restring a barnett crossbow without a bow press. Restringing your crossbow is a great way to make sure it is in optimal condition and ready to shoot. This is important to make sure the string is not too tight or too loose.īy having the right materials and tools, you can restring your Barnett Crossbow quickly and easily. Bow Scale – A bow scale is used to measure the tension of the string.Pliers- Pliers are used to pinch the nock points and cable slide in place.Servicing Tool – A servicing tool is used to attach the serving to the string and cables.Allen Wrench – An Allen wrench is used to loosen and tighten the cable slide and nock points.String Jig – A string jig is used to hold the string and cables in place while you are attaching them to the limbs.In addition to the materials needed to restring a Barnett Crossbow, you will also need some tools. It is important to buy the right type of serving for your crossbow’s model. Serving – Serving is a type of thread which is used to hold the string and cables together.Make sure you get the right size and type of nock points for your crossbow. Nock Points – Nock points are used to attach the string to the cables.It should fit the model of your crossbow and should be able to move freely. Cable Slide – The cable slide is what you use to attach the cable to the limbs.Make sure you get the right size and type of cables for your crossbow. Cables – Cables are what actually connect the limbs to the string.Check the owner’s manual to make sure you get the right size. String – Most Barnett Crossbows use a 16-strand string.To restring a Barnett Crossbow, you will need the following materials: Final Words! Things You Will Need for this Project.Step 3: Attaching the String to the Crossbow.Step 2: Measuring and Cutting the New String. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |